| DODGE F2B-GTAH-111 Mounted Units & Inserts | C0:18.2 kN; L:100 mm; d1:60.3 mm; A1:15 mm; Designation of bearing:SES208-24; d:38.1 mm; Recommended tightening torque for set screw:8.3 Nm; N:16mm; C:22.8 kN; B1:43.7 mm; |
| DODGE 12 RTL HI-CAP THRUST PLATE KIT Mounted Units & Inserts | Manufacturer Name:NTN; D:107.95 mm; Brand:NTN; Category:Roller Bearings; C:24.6 mm; Max operating temperature, Tmax:120 °C; Product Group:B04334; r1a max:3.3 mm; Minimum Buy Quantity:N/A; Min operating temperature, Tmin:-40 °C; |
| DODGE AN-GT-14-70M-D Mounted Units & Inserts | r:0.6; Recommended tightening torque for set screw:3.7 Nm; SW:3.18 mm; d1:32.4 mm; m:5 mm; C0:6.65 kN; D:47 mm; B2:13.5 mm; T min.:-20 °C; d:12.7 mm; |
| DODGE BRG22228C3AH Mounted Units & Inserts | Designation of bearing:UC320-64G2T20; Weight:25.6 kg; A:94 mm; L:310 mm; A2:125 mm; Recommended tightening torque for set screw:54.5 Nm; B:108 mm; C:171.6 kN; N:38mm; A1:32 mm; |
| DODGE BUSH-BZSP-211 Mounted Units & Inserts | Ball Grade:Class 10; Seal Type:Shield; Max Bearing Speed:5000 rpm; Bearing Locking Device:Setscrew; Retainer Material:Nylon; Grease Type:Unirex N2; Housing Coating:Powder Coat; Self Aligning:Self Centering; d:1.5000 in; End Cap Groove:Yes; |
| DODGE 9 RTL HI-CAP THRUST PLT KIT Mounted Units & Inserts | Characteristic inner ring frequency, BPFI:4.92 Hz; D:72 mm; rs min:1.1 mm; Nlim (grease):10,000 rpm; Static load, C0:15 kN; Fatigue limit load, Cu:0.68 kN; Da max:65.5 mm; da min:36.5 mm; Mass:0.36 kg; f0:13.3; |
| COOPER BEARING 01B135MEX Mounted Units & Inserts | H1:12.5 mm; S:12.7 mm; Designation of bearing:UC202G2T20; A:32 mm; s1:15.5 mm; d:15 mm; B:31 mm; N1:17 mm; J:94.5 mm; G:M6x1; |
| DODGE S1U-EXL-112R Mounted Units & Inserts | Y0:0.82; d1:88.5 mm; Characteristic outer ring frequency, BPF0:10.2 Hz; Characteristic rolling element frequency, BSF:8.4 Hz; Characteristic cage frequency, FTF:0.44 Hz; Dynamic load, C:119 kN; Category:Roller Bearings; Static load, C0:174 kN; Brand:NTN; Weight / Kilogram:0; |
| DODGE F4B-GT-07-NL Mounted Units & Inserts | T max.:200 °C; N:M8; H1:9 mm; H:33.3 mm; L1:18 mm; C:12.8 kN; A:32 mm; A1:19 mm; Recommended tightening torque for set screw:3.7 Nm; L:65 mm; |
| DODGE 061553 CAGE-MLC-205 Mounted Units & Inserts | Flinger Type:Non-Rubberized; Housing Type:2 Bolt Pillow Block; Ball Bearing Housing Series:207 Series; Retainer Material:Polymer; Max Bearing Speed:9500 rpm; d:1.4375 in; Bearing Family:Grip Tight Ball Bear; Expansion Type:Non-Expansion; Flinger Material:Steel; Retainer Type:Max Life Cage; |