| COOPER BEARING 01B115MEX Mounted Units & Inserts | d:60 mm; Nlim (grease):7,000 rpm; Static load, C0:23.2 kN; ra max:1 mm; da min:66.5 mm; Characteristic rolling element frequency, BSF:7.38 Hz; Da max:88.5 mm; Characteristic inner ring frequency, BPFI:7.93 Hz; Characteristic cage frequency, FTF:0.43 Hz; Brand:NTN; |
| COOPER BEARING 01B107GR Mounted Units & Inserts | C:52.5 kN; d1:82 mm; d:61.91 mm; B1:49.3 mm; B:33.4 mm; S:12 mm; s1:39 mm; Recommended tightening torque for set screw:16.8 Nm; C0:32.8 kN; H:176.2 mm; |
| DODGE P2B-GT-07-HT Mounted Units & Inserts | B1:43.5 mm; H:33.3 mm; Weight:0.81 kg; Z:63.4 mm; Designation of housing:P204N-; A1:22 mm; G:M6x1; Designation of open end cover:SCOE204-15; d:15 mm; d1:32.4 mm; |
| DODGE P2B-GT-11-LL Mounted Units & Inserts | Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.44 Hz; Cr:4.5 kN; Nlim (grease):16,000 rpm; Fw:10 mm; C0r:5.1 kN; Mass:0.0038 kg; D:14 mm; Dw:1.5 mm; Characteristic inner ring frequency, BPFI:8.48 Hz; |
| DODGE INS-SXRED-103 MOD Mounted Units & Inserts | A1:42 mm; N:18mm; T min.:-40 °C; C0:32.8 kN; B:65.1 mm; L1:71 mm; C:52.5 kN; A:60 mm; T max.:100 °C; s1:32.55 mm; |
| DODGE TB-DL-100-NL Mounted Units & Inserts | A1:16 mm; A5:30.2 mm; A:49 mm; L:144 mm; Designation of housing:T209N-; N:29mm; H2:83 mm; SW:3.97 mm; H1:102 mm; L1:87 mm; |
| DODGE 7 RTL HI-CAP THRUST PLATE KIT Mounted Units & Inserts | Characteristic cage frequency, FTF:0.42 Hz; Min operating temperature, Tmin:-60 °C; Fatigue limit load, Cu:0.38 kN; Characteristic outer ring frequency, BPF0:4.59 Hz; Characteristic inner ring frequency, BPFI:6.41 Hz; Static load, C0:8.3 kN; B:13 mm; ra max:1 mm; Nlim (oil):15,000 rpm; d:30 mm; |
| DODGE AN-GT-12-60M-D Mounted Units & Inserts | G:R1/8"; H:98 mm; A5:25.4 mm; C0:15.2 kN; A:21 mm; Weight:2.03 kg; L:274 mm; Designation of bearing:UC207-20G2L4; SW:3.97 mm; d:31.75 mm; |
| DODGE HS-F4B-SC-204 Mounted Units & Inserts | B:15 mm; Static load, C0:7.85 kN; Fatigue limit load, Cu:0.36 kN; da max:32 mm; Dynamic load, C:14 kN; Characteristic outer ring frequency, BPF0:3.58 Hz; d:25 mm; Characteristic cage frequency, FTF:0.4 Hz; Nlim (grease):8,900 rpm; da min:30 mm; |
| DODGE AN-GTM-09-108-D Mounted Units & Inserts | T min.:-20 °C; Recommended tightening torque for set screw:3.7 Nm; G:R1/8"; Designation of bearing:US205-16G2T20; C:14 kN; L3:38 mm; SW:3.18 mm; Weight:0.66 kg; E:22 mm; T max.:200 °C; |