| DODGE 1-1/4IN SLEEVOIL COOLANT HOSE KIT Mounted Units & Inserts | L1:65 mm; H1:22 mm; Designation of closed end cover:SCCE210; A:60 mm; H:57.2 mm; Weight:3.26 kg; N1:25 mm; s1:42.9 mm; B:49.2 mm; d:50 mm; |
| DODGE AN-GTM-09-40M-D Mounted Units & Inserts | H2:93 mm; S:17.5 mm; A:45 mm; N1:21 mm; N:14mm; Dz:80 mm; Recommended tightening torque for set screw:8 Nm; Designation of housing:PE207N-; C0:15.2 kN; A1:27 mm; |
| DODGE P2B-GTH-115-EHT Mounted Units & Inserts | Mass:0.02 kg; Nlim:28,000 rpm; Fatigue limit load, Cu:0.13 kN; da min:12 mm; da max:14.7 mm; D1:22.7 mm; Nref:28,000 rpm; D:26 mm; Brand:SNR; f0:12.4; |
| COOPER BEARING 01BCF508GRAT Mounted Units & Inserts | T:37 mm; ra max:2 mm; Y0:0.83; Brand:NTN; Inventory:0.0; B:37 mm; db min:84 mm; Max operating temperature, Tmax:120 °C; Rating life coefficient, A2:1.4; Dynamic load, C:170 kN; |
| COOPER BEARING 01B415EX Mounted Units & Inserts | Weight:3.1 kg; H:230 mm; S:22 mm; B:57 mm; Recommended tightening torque for set screw:16.8 Nm; s1:28.5 mm; A2:60 mm; C0:31.8 kN; d:44.45 mm; G:M6x1; |
| DODGE INS-SCM-215-CR MOD Mounted Units & Inserts | Max operating temperature, Tmax:120 °C; D2:99.3 mm; Da max:99.5 mm; Characteristic rolling element frequency, BSF:10.22 Hz; Dynamic load, C:30 kN; Characteristic inner ring frequency, BPFI:14.22 Hz; Min operating temperature, Tmin:-20 °C; Brand:NTN; Static load, C0:31.5 kN; a:20.1 mm; |
| DODGE S1U-EXL-308R Mounted Units & Inserts | T min.:-20 °C; E:16 mm; Designation of housing:PG204-; S:12.7 mm; T max.:100 °C; G:M6x1; L1:21 mm; C:12.8 kN; J:49 mm; N:M8; |
| DODGE S1U-EXL-114R Mounted Units & Inserts | Dynamic load, C:205 kN; f0:13.1; Fatigue limit load, Cu:6.1 kN; Radial clearance class:C3; B:50 mm; Max operating temperature, Tmax:170 °C; d:110 mm; D:240 mm; Da max:227 mm; da min:123 mm; |
| DODGE BRG22228C3AH Mounted Units & Inserts | Designation of bearing:UC320-64G2T20; Weight:25.6 kg; A:94 mm; L:310 mm; A2:125 mm; Recommended tightening torque for set screw:54.5 Nm; B:108 mm; C:171.6 kN; N:38mm; A1:32 mm; |
| DODGE AN-GT-11-55M-D Mounted Units & Inserts | L:120 mm; H1:14 mm; G:R1/8"; C0:20.8 kN; Designation of open end cover:SCOU209-28; Z:70.3 mm; H:53.9 mm; H2:107 mm; S:19 mm; s1:24.6 mm; |