| DODGE 12IN XC PIPE GROMMET KIT Mounted Units & Inserts | C0:4.78 kN; H:112.5 mm; Weight:0.49 kg; T max.:100 °C; Recommended tightening torque for set screw:3.5 Nm; H3:55; e:19 mm; J:90 mm; A4:28.5 mm; A:32 mm; |
| DODGE S1U-EXL-307R Mounted Units & Inserts | A1:12 mm; A2:42.2 mm; N:11,5mm; L:108 mm; s1:19.05 mm; Z:46.4 mm; T min.:-20 °C; T max.:100 °C; Designation of housing:FE206N-; d:30.16 mm; |
| DODGE P2B-GTM-115-LL Mounted Units & Inserts | Dw:2 mm; D:24 mm; F:16 mm; Lubrication hole on outer ring:Oui/Yes; Characteristic inner ring frequency, BPFI:10 Hz; Characteristic outer ring frequency, BPF0:8 Hz; Precision class:P0; Lw:7.3 mm; ras max:0.3 mm; Radial clearance class:CN; |
| COOPER BEARING 01BCP415GRAT Mounted Units & Inserts | S:14.3 mm; T min.:-20 °C; T max.:100 °C; m:5 mm; C0:6.3 kN; G:M6x1; Recommended tightening torque for set screw:3.9 Nm; D:52 mm; C1:4.5 mm; SW:3 mm; |
| COOPER BEARING 01BCF507EXAT Mounted Units & Inserts | A:40 mm; Weight:0.95 kg; C0:6.65 kN; Recommended tightening torque for set screw:5.5 Nm; T min.:-20 °C; d1:32.4 mm; B1:43.5 mm; B:34 mm; S:17 mm; A1:22 mm; |
| DODGE AN-GT-11-55M-D Mounted Units & Inserts | L:120 mm; H1:14 mm; G:R1/8"; C0:20.8 kN; Designation of open end cover:SCOU209-28; Z:70.3 mm; H:53.9 mm; H2:107 mm; S:19 mm; s1:24.6 mm; |
| DODGE S1U-EXL-112R Mounted Units & Inserts | Y0:0.82; d1:88.5 mm; Characteristic outer ring frequency, BPF0:10.2 Hz; Characteristic rolling element frequency, BSF:8.4 Hz; Characteristic cage frequency, FTF:0.44 Hz; Dynamic load, C:119 kN; Category:Roller Bearings; Static load, C0:174 kN; Brand:NTN; Weight / Kilogram:0; |
| DODGE 6 RTL HI-CAP THRUST PLATE KIT Mounted Units & Inserts | B:22 mm; C:9.55 kN; Weight:0.4 kg; T min.:-40 °C; Recommended tightening torque for set screw:3.2 Nm; Z:36.8 mm; A1:11 mm; N:12mm; H:99 mm; s1:11 mm; |
| DODGE HS-F4B-SC-204 Mounted Units & Inserts | B:15 mm; Static load, C0:7.85 kN; Fatigue limit load, Cu:0.36 kN; da max:32 mm; Dynamic load, C:14 kN; Characteristic outer ring frequency, BPF0:3.58 Hz; d:25 mm; Characteristic cage frequency, FTF:0.4 Hz; Nlim (grease):8,900 rpm; da min:30 mm; |
| DODGE F4B-GT-07-NL Mounted Units & Inserts | T max.:200 °C; N:M8; H1:9 mm; H:33.3 mm; L1:18 mm; C:12.8 kN; A:32 mm; A1:19 mm; Recommended tightening torque for set screw:3.7 Nm; L:65 mm; |