| No. | Brand | P | E | Z | B | T | D | r | S |
| AN-GT-11-55M-D | DODGE | - | - | 70.3 mm | - | - | - | - | 19 mm |
| S1U-EXL-112R | DODGE | - | - | - | - | - | - | - | - |
| 4-15/16 RTL HI-CAP THR PLT KIT | DODGE | - | - | - | - | - | 150 mm | - | - |
| 5-7/16 RTL HI-CAP THST PLT KIT | DODGE | - | - | - | 29 mm | - | 80 mm | - | - |
| AN-GTM-11-200-D | DODGE | - | - | - | 19 mm | - | 72 mm | - | - |
| HS-F4B-SC-204 | DODGE | - | - | - | 15 mm | - | - | - | - |
| 01BCF407GRAT | COOPER BEARING | - | - | - | - | - | - | - | 54 mm |
| P2B-SC-112 MOD | DODGE | - | - | - | - | - | - | - | - |
| EC-214 | DODGE | - | - | 31.8 mm | 65.1 mm | - | - | - | 25.4 mm |
| P2B-SCMAH-45M MOD | DODGE | 230 mm | - | - | - | - | - | - | - |
| AN-GT-12-60M-D | DODGE | - | - | - | - | - | - | - | - |
| HS-P2B-SC-210 | DODGE | - | - | - | 146 mm | - | - | - | - |
| 10IN XC PIPE GROMMET KIT | DODGE | - | - | - | - | - | - | - | - |
| 12 SLEEVOIL BEARING ISOLATOR | DODGE | - | - | 76.1 mm | 51.6 mm | - | - | - | 19 mm |
| 01BCF500EXAT | COOPER BEARING | - | - | - | 32 mm | - | - | - | - |
| S1U-EXL-307R | DODGE | - | - | 46.4 mm | - | - | - | - | - |
| 01B104GR | COOPER BEARING | - | - | 44 mm | - | - | - | - | 30.9 mm |
| 1IN SLEEVOIL COOLANT HOSE KIT | DODGE | - | - | - | 49.2 mm | - | - | - | 19 mm |
| SNC520 | COOPER BEARING | - | - | - | 49.2 mm | - | - | - | - |
| 01B507GR | COOPER BEARING | - | - | - | - | - | - | - | - |
| AN-GTM-14-60M-D | DODGE | - | - | - | - | - | 75 mm | - | - |
| 01BCF515EXAT | COOPER BEARING | - | - | - | - | - | - | - | - |
| P2B-GT-05 MOD | DODGE | - | - | - | 42.9 mm | - | 72 mm | 1.1 | 17.5 mm |
| 01BCF507EXAT | COOPER BEARING | - | - | - | 34 mm | - | - | - | 17 mm |
| DODGE P2B-GTH-115-EHT Mounted Units & Inserts | Mass:0.02 kg; Nlim:28,000 rpm; Fatigue limit load, Cu:0.13 kN; da min:12 mm; da max:14.7 mm; D1:22.7 mm; Nref:28,000 rpm; D:26 mm; Brand:SNR; f0:12.4; |
| COOPER BEARING 01BCF415EXAT Mounted Units & Inserts | Designation of open end cover:SCOU211-34; C:43.55 kN; Weight:3.62 kg; H1:25 mm; S:22.2 mm; B:55.6 mm; A1:34 mm; H2:126 mm; Recommended tightening torque for set screw:16.8 Nm; Designation of housing:PG211N-; |
| DODGE FB-DLEZ-107-BEV Mounted Units & Inserts | N:17mm; Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:UC209G2T04; H:105 mm; B:49.2 mm; Weight:3.08 kg; C0:20.8 kN; C:31.85 kN; S:19 mm; L1:62 mm; |
| DODGE BUSH-BZSP-211 Mounted Units & Inserts | Ball Grade:Class 10; Seal Type:Shield; Max Bearing Speed:5000 rpm; Bearing Locking Device:Setscrew; Retainer Material:Nylon; Grease Type:Unirex N2; Housing Coating:Powder Coat; Self Aligning:Self Centering; d:1.5000 in; End Cap Groove:Yes; |
| DODGE AN-GT-15-300-D Mounted Units & Inserts | A1:27 mm; G:M6x1; L:110 mm; d1:51.1 mm; T min.:-20 °C; S:18.8 mm; d:33.34 mm; C0:15.2 kN; B1:51.1 mm; B:37.6 mm; |
| DODGE 10IN XC PIPE GROMMET KIT Mounted Units & Inserts | Housing Coating:No Coating; Ball Material:440 STAINLESS STEEL; Ball Grade:Class 10; Retainer Material:Polymer; Bearing Outer Ring Material:None; Bearing Series:207 Series; Anti-Rotation Pin:Yes; Flinger Type:INTERNAL RUBBER LIP; Self Aligning:Self Centering; Expansion Type:Non-Expansion; |
| DODGE P2B-SC-115-NL MOD Mounted Units & Inserts | Designation of closed end cover:SCC204; T max.:100 °C; H:78 mm; H2:41 mm; C0:6.65 kN; G:R1/8"; S:12.7 mm; C:12.8 kN; L1:225 mm; L:264 mm; |
| DODGE 8 RTL HI-CAP THRUST PLT KIT Mounted Units & Inserts | Recommended tightening torque for set screw:11.5 Nm; A:40 mm; L:165 mm; d:50 mm; A1:14 mm; G:M6x1; A4:28 mm; S:10.9 mm; B:43.5 mm; s1:21.75 mm; |
| DODGE P2B-GT-05 MOD Mounted Units & Inserts | S:17.5 mm; C1:5.8 mm; G:5/16-24UNF; D:72 mm; C0:15.2 kN; Weight:0.48 kg; r:1.1; B:42.9 mm; SW:3.97 mm; T max.:100 °C; |
| COOPER BEARING 01BCF500GRAT Mounted Units & Inserts | Characteristic inner ring frequency, BPFI:5.41 Hz; f0:13.9; rs min:0.6 mm; da min:24 mm; Nlim (grease):11,000 rpm; Min operating temperature, Tmin:-25 °C; Fatigue limit load, Cu:0.23 kN; Characteristic rolling element frequency, BSF:4.76 Hz; Mass:0.07 kg; Radial clearance class:C3; |
DODGE AN-GT-12-60M-D Mounted Units & Inserts Video