| DODGE INS-SCM-215-CR MOD Mounted Units & Inserts | Max operating temperature, Tmax:120 °C; D2:99.3 mm; Da max:99.5 mm; Characteristic rolling element frequency, BSF:10.22 Hz; Dynamic load, C:30 kN; Characteristic inner ring frequency, BPFI:14.22 Hz; Min operating temperature, Tmin:-20 °C; Brand:NTN; Static load, C0:31.5 kN; a:20.1 mm; |
| DODGE TP-60X18-TUFR-SSS Mounted Units & Inserts | da max:75 mm; Da max:102 mm; B:22 mm; Brand:NTN; Radial clearance class:C4; Dynamic load, C:52.5 kN; Static load, C0:36 kN; Min operating temperature, Tmin:-25 °C; f0:14.3; rs min:1.5 mm; |
| DODGE S1U-EXL-308R Mounted Units & Inserts | T min.:-20 °C; E:16 mm; Designation of housing:PG204-; S:12.7 mm; T max.:100 °C; G:M6x1; L1:21 mm; C:12.8 kN; J:49 mm; N:M8; |
| DODGE INS-GT-05-LL Mounted Units & Inserts | G:M6x1; H2:83 mm; N1:19 mm; T min.:-40 °C; L:149 mm; SW:3.97 mm; A1:16 mm; Designation of bearing:EX210-30G2T04; Weight:2.8 kg; s1:42.9 mm; |
| DODGE AN-GTM-09-40M-D Mounted Units & Inserts | H2:93 mm; S:17.5 mm; A:45 mm; N1:21 mm; N:14mm; Dz:80 mm; Recommended tightening torque for set screw:8 Nm; Designation of housing:PE207N-; C0:15.2 kN; A1:27 mm; |
| COOPER BEARING 01B507GR Mounted Units & Inserts | C0:4.78 kN; T min.:-20 °C; J:76.5 mm; Recommended tightening torque for set screw:3.2 Nm; L:57 mm; A:25.5 mm; Designation of bearing:US201-08G2T20; s1:11 mm; G:M6x1; Designation of housing:FL203-; |
| DODGE AN-GTM-09-108-D Mounted Units & Inserts | T min.:-20 °C; Recommended tightening torque for set screw:3.7 Nm; G:R1/8"; Designation of bearing:US205-16G2T20; C:14 kN; L3:38 mm; SW:3.18 mm; Weight:0.66 kg; E:22 mm; T max.:200 °C; |
| COOPER BEARING 01B515GR Mounted Units & Inserts | Brand:Baldor-Dodge; Retainer Material:Nylon; Bearing Insert Material:Steel; Housing Material:Cast Iron; Bearing Outer Ring Material:Steel; Bearing Duty:Normal Duty; Manufacturing Plant Location:Rogersville, TN; Ship Weight:2.81 LB; Anti-Rotation Pin:Yes; Housing Type:2 Bolt Flange; |
| DODGE P2B-SCH-115-E-HT Mounted Units & Inserts | Recommended tightening torque for set screw:8 Nm; L1:68 mm; H:63.5 mm; N:18mm; N1:30 mm; T min.:-40 °C; H2:124.5 mm; G:R1/8"; Designation of housing:PE211N-; s1:22.65 mm; |
| COOPER BEARING 01BCP403GRAT Mounted Units & Inserts | Self Aligning:Self Centering; Housing Material:Polymer; Max Bearing Speed:4000 rpm; Ship Weight:2.77 LB; Bearing Duty:Normal Duty; Shaft Attachment (2):Set Screw; Bearing Series:209 Series; Expansion Type:Non-Expansion; End Cap Groove:Yes; Retainer Type:Std Retainer; |