| 3 Inch | 76.2 Millimeter x 6.875 Inch | 174.625 Millimeter x 4.875 Inch | 123.825 Millimeter SEALMASTER SEHB-48 Hanger Unit Bearings | Adapter Assembly Number3:SNW-120 x 3-3/8; Oil Level K:2.1250 in; Bolt Hole Width:0.875 in; D:2.2500 in; Diameter S-1:3 3/8 in; Size of Base Bolts Required:0.875 in; Triple Seal 2 Req’d:LOR 74; C:6.8750 in; No. of Base Bolts Required:4; A:5.2500 in; Size (mm):3 Inch | 76.2 Millimeter x 6.875 Inch | 174.625 Millimeter x 4.875 Inch | 123.825 Millimeter ; |
| 2.438 Inch | 61.925 Millimeter x 5.625 Inch | 142.875 Millimeter x 4 Inch | 101.6 Millimeter SEALMASTER SEHB-39 Hanger Unit Bearings | Brand:CX; Bore Diameter (mm):35; Basic dynamic load rating (C):93,5 kN; D:80 mm; a:20 mm; Basic static load rating (C0):114 kN; Bearing number:32307 A; Width (mm):32,75; B:31 mm; Size (mm):2.438 Inch | 61.925 Millimeter x 5.625 Inch | 142.875 Millimeter x 4 Inch | 101.6 Millimeter ; |
| 2 Inch | 50.8 Millimeter x 2.031 Inch | 51.587 Millimeter x 3.25 Inch | 82.55 Millimeter SEALMASTER SCHB-32R Hanger Unit Bearings | B:57,531 mm; (Grease) Lubrication Speed:2000 r/min; (Oil) Lubrication Speed:2700 r/min; Width (mm):57,15; C:46,038 mm; r2 min.:3,2 mm; T:57,15 mm; Size (mm):2 Inch | 50.8 Millimeter x 2.031 Inch | 51.587 Millimeter x 3.25 Inch | 82.55 Millimeter ; Weight:7,05 Kg; Calculation factor (Y0):0,99; |
| 1 Inch | 25.4 Millimeter x 1.438 Inch | 36.525 Millimeter x 2.5 Inch | 63.5 Millimeter SEALMASTER SCHB-16T Hanger Unit Bearings | C:2 mm; Basic dynamic load rating (C):0,085 kN; Width (mm):2; Bearing number:681XZZ; Outer Diameter (mm):4; d:1,5 mm; r min.:0,15 mm; Size (mm):1 Inch | 25.4 Millimeter x 1.438 Inch | 36.525 Millimeter x 2.5 Inch | 63.5 Millimeter ; B:2 mm; Brand:ISB; |
| 0.984 Inch | 25 Millimeter x 1.5 Inch | 38.1 Millimeter x 2.52 Inch | 64 Millimeter SEALMASTER SEHB-305 Hanger Unit Bearings | d:25,4 mm; Brand:RHP; Basic static load rating (C0):30,6 kN; Basic dynamic load rating (C):35 kN; B:19,05 mm; Weight:0,288 Kg; Bore Diameter (mm):25,4; Bearing number:MRJ1; Size (mm):0.984 Inch | 25 Millimeter x 1.5 Inch | 38.1 Millimeter x 2.52 Inch | 64 Millimeter ; Width (mm):19,05; |
| 1.181 Inch | 30 Millimeter x 3.126 Inch | 79.4 Millimeter x 2.52 Inch | 64 Millimeter SEALMASTER SEHB-206 Hanger Unit Bearings | Dimension D:4.126 in; Inside Ring Outside Diameter:2.280 in; Series:Standard; Center of Bearing from Bearing End S:13.5 mm; Static Load Rating:4600 lbf; Bolt Size:M12; Weight:4.94 lb; Dynamic Load Rating:8160 lbf; Total Length L:136.5 mm; Seal Type:Molded Shroud; Size (mm):1.181 Inch | 30 Millimeter x 3.126 Inch | 79.4 Millimeter x 2.52 Inch | 64 Millimeter ; |
| 2.188 Inch | 55.575 Millimeter x 5.625 Inch | 142.875 Millimeter x 4 Inch | 101.6 Millimeter SEALMASTER SEHB-35TC Hanger Unit Bearings | Brand:INA; d:35 mm; Bore Diameter (mm):35; D:64,5 mm; Outer Diameter (mm):64,5; Width (mm):18,5; C:17,5 mm; B:18,5 mm; Size (mm):2.188 Inch | 55.575 Millimeter x 5.625 Inch | 142.875 Millimeter x 4 Inch | 101.6 Millimeter ; Bearing number:712179410; |
| 1.313 Inch | 33.35 Millimeter x 3.625 Inch | 92.075 Millimeter x 2.75 Inch | 69.85 Millimeter SEALMASTER SEHB-21C Hanger Unit Bearings | C:22 mm; r1 min.:0,6 mm; Width (mm):22; Basic static load rating (C0):12 kN; Weight:0,48 Kg; Basic dynamic load rating (C):14,4 kN; a:27,9 mm; d:55 mm; Outer Diameter (mm):90; Bore Diameter (mm):55; Size (mm):1.313 Inch | 33.35 Millimeter x 3.625 Inch | 92.075 Millimeter x 2.75 Inch | 69.85 Millimeter ; |
| 2.438 Inch | 61.925 Millimeter x 5.625 Inch | 142.875 Millimeter x 4 Inch | 101.6 Millimeter SEALMASTER SEHB-39T Hanger Unit Bearings | Oil lub.:4100; (Grease) Lubrication Speed:3100 r/min; r(min):1.5; Width (mm):31; Bore Diameter (mm):70; C0r:89.8; Cu:5.05; Grease lub.:3100; Basic dynamic load rating (C):62.1 kN; Bearing number:4214; Size (mm):2.438 Inch | 61.925 Millimeter x 5.625 Inch | 142.875 Millimeter x 4 Inch | 101.6 Millimeter ; |
| 2 Inch | 50.8 Millimeter x 2.031 Inch | 51.587 Millimeter x 3.25 Inch | 82.55 Millimeter SEALMASTER SEHB-32RTC Hanger Unit Bearings | Shaft Dia., Nominal (d):50.0000; Wall Thickness (S3):2.500; Bearing Type:flanged; Flange Radius (rfl):2.000; Bearing Outside Diameter, Nominal(Do):55.000; Material:Wrapped bronze with; Shaft Size (ds) - 50 -0.080 / -0.105:50 0.080 / 0.105; Bearing Bore after Mounting (di) - 50 +0.062 / -0:50 +0.062 / 0; ID Chamfer Length (Ci):0.600; ID Chamfer Angle (B deg.):45; Size (mm):2 Inch | 50.8 Millimeter x 2.031 Inch | 51.587 Millimeter x 3.25 Inch | 82.55 Millimeter ; |