| SMITH CR-2-3/4-C Cam Follower and Track Roller - Stud Type | radial static load capacity:9.3 kN; contact angle:15 °; radial dynamic load capacity:15.6 kN; precision rating:ABEC 9/7 (; finish/coating:Uncoated; ball screw application:Not for Ball Screws; closure type:Single Seal; d:25 mm; B:15 mm; fillet radius:1 mm; |
| SMITH CR-7/8 Cam Follower and Track Roller - Stud Type | B:42mm; Clearance:C3; Dynamic Load Rating (kN):132; Static Load Rating (kN):96.5; Limiting Speed Rating (r/min):8500; Weight:5.06 KGS; Fatigue Load Rating (kN):5.8; SKU:6414-ma-c3-fag; d:70mm; Seals or Shields:Open Type; |
| SMITH CR-1-3/8-B Cam Follower and Track Roller - Stud Type | internal clearance:C0; d:90 mm; closure type:Open; radial dynamic load capacity:28500 lb; contact angle:25 °; standards met:ABMA; ball screw application:Not for Ball Screws; cage material:Phenolic Resin; maximum rpm:8000 RPM; fillet radius:2 mm; |
| SMITH CR-6-XB Cam Follower and Track Roller - Stud Type | dynamic load capacity:11800 lbf; locking device:Set Screw; unit type:Side Mount; rod hole diameter:1-3/8 in; lubrication type:Lubrication Fitting; series:UCST200C4HR5; slot spacing:4.0000 in; seal type:Contact with Slinger; overall length:7-5/8 in; overall height:5-3/4 in; |
| SMITH CR-3-1/2-XB Cam Follower and Track Roller - Stud Type | Specific dynamic load factor K:100 N/mm²; α:15 °; M:2.5 mm; dk:53 mm; Sealing solution:Triple-lip seals; b1:3.9 mm; r1 min.:0.6 mm; da max.:39.8 mm; Da max.:57.8 mm; Basic dynamic load rating C:100 kN; |
| RBC BEARINGS RBC 2 3/4 Cam Follower and Track Roller - Stud Type | kit type:Tapered Roller Cup S; size code:17; series:K2; compatible bore diameter:108.7 mm; |
| RBC BEARINGS S 96 LW Cam Follower and Track Roller - Stud Type | locking device:Set Screw; bore type:Round; radial dynamic load capacity:2640 kgf; length through bore:32.9 mm; series:BFPL200CW; mounting type:Four-Bolt Flange; lubrication type:Lubrication Fitting; expansion type:Non-Expansion Bearin; replacement bearing:B7; seal type:Contact Seal; |
| SMITH CR-1-7/8 Cam Follower and Track Roller - Stud Type | d:0.6250 in; standards met:AMS-5630, AMS-5342; thread direction:Left Hand; overall height:3.3750 in; race material:Stainless Steel; Weight:0.36 lb; manufacturer catalog:www.aurorabearing.co; shank thread size:5/8-18; radial static load capacity:16922 lbf; head width:0.4840 in; |
| SMITH CR-7/8-C Cam Follower and Track Roller - Stud Type | Housing washer:GS 89422; r1,2 min.:3 mm; Mass bearing:17.4 kg; Basic static load rating C0:3350 kN; Da max.:123 mm; Limiting speed:1300 r/min; B:24.5 mm; Basic dynamic load rating C:800 kN; Reference speed:630 r/min; H:73 mm; |
| RBC BEARINGS S 72 Cam Follower and Track Roller - Stud Type | base width:3.49 in; base to bore centerline:3.7500 in; housing material:Cast Iron; overall height:7.6900 in; finish/coating:Uncoated; D:10.81 to 11.19 in; replacement bearing:22218; radial dynamic load capacity:65500 lb; radial static load capacity:81500 lb; seal type:Triple Lip; |