| RBC BEARINGS S 28 L Cam Follower and Track Roller - Stud Type | Adapter sleeve assembly:SNW 126x4.7/16; Max. speed for Taconite seal:700 r/min; H:336.55 mm; ba:72.231 mm; Stabilizing ring:SR-0-26; h:61.913 mm; L:558.8 mm; A1:158.75 mm; Mass pillow block:108 kg; Eye bolt:2 x 3/8-16 UNC; |
| SMITH CR-11/16 Cam Follower and Track Roller - Stud Type | Seals or Shields:Open Type; Availability:In Stock; d:85mm; Clearance:Standard; Static Load Rating (kN):20.8; B:28mm; Cage Type:Steel; Limiting Speed Rating (r/min):5600; SKU:1217k-skf; Weight:0.02 KGS; |
| SMITH CR-5-XB Cam Follower and Track Roller - Stud Type | maximum rpm:5000 RPM; series:NKI; closure type:Open; D:110 mm; static load capacity:29500 lbf; operating temperature range:-20 to +120 &de; lubrication hole type:Lubrication Groove &; precision rating:Not Rated; flanges:With Flanges; dynamic load capacity:16200 lbf; |
| SMITH CR-3-1/2-XB Cam Follower and Track Roller - Stud Type | Specific dynamic load factor K:100 N/mm²; α:15 °; M:2.5 mm; dk:53 mm; Sealing solution:Triple-lip seals; b1:3.9 mm; r1 min.:0.6 mm; da max.:39.8 mm; Da max.:57.8 mm; Basic dynamic load rating C:100 kN; |
| SMITH CR-2-B Cam Follower and Track Roller - Stud Type | B:15 mm; Weight:0.280 lb; row type & fill slot:Single Row Non-Fill; static load capacity:7878 lbs; D:52 mm; series:6200; snap ring included:Without Snap Ring; closure type:Open; maximum rpm:15000 RPM; d:25 mm; |
| RBC BEARINGS S 104 LWX Cam Follower and Track Roller - Stud Type | replacement bearing:5212TM; B:7.1250 in; lubrication type:Lubrication Fitting; mounting type:Four-Bolt Flange; seal type:Felt Seal; bore type:Round; duty type:Standard Duty; expansion type:Non-Expansion Bearin; d:60 mm; manufacturer catalog number:704311; |
| SMITH CR-1-3/4-C Cam Follower and Track Roller - Stud Type | pressure tolerance:Ambient; continuous temperature range:-22 to 400°F; shaft diameter:1.3750 in; misalignment tolerance:0.020 in; typical application:Exceptional Bearing; Weight:0.301 lb; width:0.7500 in; construction description:ISO-GARD® Flange; harmonization code:3926904590.US; manufacturer catalog number:29502-5386; |
| SMITH CR-5/8-C Cam Follower and Track Roller - Stud Type | lubrication type:Lubrication Fitting; housing material:Cast Iron - Nickel P; pilot diameter:3-15/16 in; replacement bearing:UE208-24MZ20RF; locking device:Accu-Loc; B:5.7031 in; seal type:Dual Lip with Slinge; duty type:Standard Duty; series:UEFC200NPMZ20RF; length through bore:1.976 in; |
| RBC BEARINGS S 24 LW Cam Follower and Track Roller - Stud Type | Dynamic Load Rating (kN):74.1; Fatigue Load Rating (kN):1.9; Availability:In Stock; d:55mm; Cage Type:Steel; Static Load Rating (kN):45; Seals or Shields:Two Rubber Seals; SKU:6311-2rs1/c3gjn-skf; Weight:0.02 KGS; D:120mm; |
| SMITH CR-3-1/2 Cam Follower and Track Roller - Stud Type | internal clearance:C0; outer ring width:10 mm; d:12 mm; contact angle:25 °; ball screw application:Not for Ball Screws; B:10 mm; series:200; radial static load capacity:3.75 kN; finish/coating:Uncoated; cage material:Phenolic Resin; |