Insert Bearings Cylindrical OD
Insert Bearings with a Snap Ring has two set screws for the attachment to the shaft. The SER200 Series Insert Bearing with a Snap Ring has a Cylindrical Outer or parallel outer diameter and comes to the exact fit of a snap ring. There are also two grub screws which allows it to tighten against the shaft once it is fitted properly.(Cylindrical OD) Insert Bearings is a high quality insert bearing. This bearing has an eccentric (cam) locking collar for attaching to the shaft. This specific insert bearing has a narrow inner ring and eccentric locking collar and dust seals on both sides with a cylindrical OD and greaseable.
Insert bearings are based on sealed deep groove ball bearings in the 62 and 63 series, but have a convex outer ring and in most cases an extended inner ring with a specific locking device, enabling quick and easy mounting onto the shaft.
- SEALMASTER ERX-20 HIY Insert Bearings Cylindrical OD
- 52.5 kN
- 25 mm
- SEALMASTER ERX-47 HI Insert Bearings Cylindrical OD
- 41.2 mm
- 11.5 Nm
- SEALMASTER ERX-43 HIY Insert Bearings Cylindrical OD
- 9,300 rpm
- CN
- SEALMASTER ERX-8 HI Insert Bearings Cylindrical OD
- SCOU207-22
- 48 mm
- SEALMASTER ERX-43 HI Insert Bearings Cylindrical OD
- 0.81 kg
- 19mm
- SEALMASTER ERX-39 HIY Insert Bearings Cylindrical OD
- 204 Series
- 6000 rpm
- SEALMASTER ERX-31T HI Insert Bearings Cylindrical OD
- Triple Lip
- Non-Expansion
- SEALMASTER ERX-31 HIY Insert Bearings Cylindrical OD
- US204G2T20
- 200 °C
- SEALMASTER ERX-28 HIY Insert Bearings Cylindrical OD
- 49.2 mm
- 102 mm
- SEALMASTER ERX-27 HI Insert Bearings Cylindrical OD
- 65.5 mm
- 0.7 kN
