Cam Follower and Track Roller - Stud Type
Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers.High Quality Stud Type Track Roller Bearing Cam Follower Bearing, Find Complete Details about High Quality Stud Type Track Roller Bearing Cam Follower Bearing ,Stud Type Track Roller Bearing,Cam Follower Bearing,Cam Follower from Other Bearings Supplier or Manufacturer.
Thread the stud directly into a component or secure with a nut for through-hole mounting. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Also known as cam followers, track rollers support loads while guiding and positioning work.
- SMITH CR-1-1/4-C Cam Follower and Track Roller - Stud Type
- 60000
- Open Type
- SMITH CR-1-1/8-C Cam Follower and Track Roller - Stud Type
- 40 mm
- Chrome Steel
- SMITH CR-6-XB Cam Follower and Track Roller - Stud Type
- 11800 lbf
- Set Screw
- SMITH CR-4-XB Cam Follower and Track Roller - Stud Type
- 1/2 in
- RoHS, REACH, DRC Con
- SMITH CR-7/8-C Cam Follower and Track Roller - Stud Type
- GS 89422
- 3 mm
- SMITH CR-3/4-C Cam Follower and Track Roller - Stud Type
- 17 lbs
- 3.3000 in
- SMITH CR-5/8-AC Cam Follower and Track Roller - Stud Type
- T Water
- Click here
- SMITH CR-11/16-C Cam Follower and Track Roller - Stud Type
- 0.8594 in
- 4.0156 in
- SMITH CR-5/8-C Cam Follower and Track Roller - Stud Type
- Lubrication Fitting
- Cast Iron - Nickel P
- SMITH CR-1/2-A-C Cam Follower and Track Roller - Stud Type
- 877000 lbf
- Steel
- SMITH CR-9/16-C Cam Follower and Track Roller - Stud Type
- Open Type
- 45mm